Care Instructions

Benefits

• Highly durable
• Lightweight
• Easy to clean
• Rust proof
• UV, fade and weather resistant
• Environmentally-friendly
• Low maintenance

Natural Characteristics

• Colour variation
• Texture variation
• Blemishes
• Abrasion resistance
• Colour fastness
• Scent

How to Clean

How to clean powder coated aluminium

1. Remove all objects and items before cleaning
2. Wipe away any light dust and particles with a dry microfiber cloth
3. Wipe off any sticky marks or stubborn spots with a damp wet cloth or soft-bristled brush
4. Prepare a mild cleaning solution consisting of approximately 2 tablespoons of ph-neutral soap with 1 litre of water
5. Apply to a clean microfibre cloth and wipe down all surfaces
6. Rinse off thoroughly with clean water to remove any excess detergent
7. Use a soft, clean cloth to wipe down all surfaces and allow to dry naturally
8. Repeat the cleaning process every 3-6 months, depending on the furniture’s level of use

How to remove hard-water stains

1. Prepare a solution of equal parts white vinegar and distilled water
2. Spray the solution directly on to the stain and allow to sit for 10-15 minutes
3. Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
4. If the scaling has only been slightly lifted, repeat steps 2 and 3 to allow the stain more time to soak
5. If successful, allow to air dry completely before use, otherwise proceed to the next step
6. Prepare a paste consisting of 3 parts baking soda, 1 part distilled water and a few drops of white vinegar
7. Apply the paste to a clean sponge and gently scrub the stain
8. Apply more paste directly on to the stain and allow to sit for 15 minutes
9. Rinse thoroughly with a clean, wet cloth to ensuring all residue has been removed
10. Re-apply the paste for a second time if required

Tips

0

Do's

• Before applying any cleaning agent, including recommended agents, test in a small out of the way area
• Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
• Cover furniture when not in use to prevent damage from inclement weather, leaf mulch, sap and wildlife
• Consider furniture placement and avoid areas that are likely to cause excessive build up of corrosive materials
• When using white spirits, cleaning should be carried out in shade and during cooler temperatures using a soft cloth and gentle wiping only
• It is recommended that prior to cleaning, a small non-visible area of the powder coated article be tested to ensure that no visual color change or damage will occur

Don'ts

• Wipe down surfaces regularly to prevent buildup of excess dirt, dust, salt or chlorine, which may lead to spotting and staining
• Don’t hose down your furniture during periods of extreme heat

• Prolonged outdoor use in extreme weather conditions is not recommended
• Do not under any circumstances use strong solvents such as thinners or solutions containing chlorinated hydrocarbons, esters or ketones
• Abrasive cleaners or cutting compounds should not be used
• Interpon Powder Coatings recommends nothing stronger than white spirits to assist with stubborn stains such as hard water spots / calcium stains